What is the Inversol System Constructor?
It is a free interactive configurator at inversol.ge/constructor/ where you pick a Deye or EcoBSS inverter, compatible batteries, 625 W or 435 W modules by quantity, optional EV charger, and electricity tariff — then see equipment cost from Inversol stock, a separate ~10% install estimate (Inversol or partners), and ROI payback instantly.
What is the difference between LV and HV inverters?
Low-voltage (LV) hybrid inverters work with 51.2 V battery modules such as HECKMAN wall/rack units and EcoBSS STORE L5/L10/L15. High-voltage (HV) Deye hybrids require HV battery systems like HECKMAN RHFP rack batteries. LV and HV are not interchangeable — the constructor greys out incompatible batteries automatically.
Do I need a battery for an on-grid system?
No. On-grid (grid-tied) inverters export surplus solar to the utility under Georgia's net-metering rules and do not require battery storage. The constructor hides the battery step when you select an on-grid inverter. Choose a hybrid inverter only if you want backup power or self-consumption with storage.
Which batteries are compatible with LV hybrid inverters?
LV Deye and EcoBSS FLEX 3L hybrid inverters pair with 51.2 V LiFePO4 modules: HECKMAN MLFP wall/rack batteries and EcoBSS STORE L5, L10, and L15. Enable storage and add 1–16 battery units in the constructor; total capacity scales with quantity.
Which batteries work with HV hybrid inverters?
High-voltage Deye hybrid inverters (HP3 series) require HV battery systems such as HECKMAN RHFP high-voltage rack batteries. Standard 51.2 V LV modules cannot be connected to HV inverters.
How is installation cost calculated in the constructor?
Install is estimated at ~10% of hardware as an optional budget line (mounting, electrical work, commissioning). It is not included in the Inversol equipment total — installation may be done by Inversol or partners. Final quote after a site survey.
How is ROI and payback calculated?
Annual savings = kWp × 100 kWh/kW/month × 12 × selected tariff. Payback years = equipment total (hardware only) ÷ annual savings. This is an upper estimate (all generation used on site at the grid tariff); the conservative figure assumes half of the generation is exported at 0.06 ₾/kWh, because net billing pays wholesale rates for exports. Installation is not included. Business (B2B) uses 0.35 ₾/kWh; residential (B2C) uses 0.24 ₾/kWh. Results are indicative; actual generation depends on roof orientation, shading, and equipment efficiency.
What is the difference between B2B and B2C tariff in the constructor?
Business customers typically pay higher grid tariffs (~0.35 ₾/kWh), so solar savings and ROI are faster. Residential (household) tariffs are lower (~0.24 ₾/kWh), which extends payback but still delivers strong long-term savings. Select the tariff that matches your meter category for a realistic estimate.
What solar panel types can I choose?
Choose 625 W (330 ₾) or 435 W (250 ₾) modules, then set the quantity with the slider. System kWp = modules × module power. Maximum modules depend on the selected inverter (+35% DC rule).
What is kWp and how is it set in the constructor?
kWp (kilowatt-peak) is the rated DC power of your solar array under standard test conditions. In the constructor you choose module wattage and quantity; kWp is calculated automatically (modules × module kWp). The maximum is limited by the selected inverter (+35% DC rule).
How much electricity does 1 kWp generate per year in Georgia?
The constructor uses 100 kWh per kW per month (~1,200 kWh/kWp/year, PVGIS for Tbilisi) for ROI estimates. South-facing unshaded roofs may exceed this; heavily shaded or east/west arrays may produce less.
When should I choose on-grid vs hybrid?
On-grid is ideal for maximum savings under net-metering when backup power is not required — lowest cost per kWp. Hybrid adds batteries for blackout backup, peak shaving, or higher self-consumption. Hybrid systems cost more but provide energy security.
Can I add an EV charger in the constructor?
Yes. Enable the EV charger extra and pick a model from the Inversol catalog. The charger price is added to the equipment total; the optional install estimate scales with hardware.
Is the constructor estimate a final contract price?
No — it is an indicative budget figure. Final design, exact kWp, cable routes, structural work, and grid-operator requirements are confirmed after an on-site audit by Inversol engineers.
Which inverter brands are available in the constructor?
Deye on-grid, LV hybrid, and HV hybrid inverters plus EcoBSS FLEX 3L LV hybrid inverters (6–12 kW). All prices are pulled from the live Inversol catalog.
Does the constructor support net-metering in Georgia?
Yes. On-grid and hybrid systems configured here are designed for Georgia's net-metering framework where exported kWh offsets consumption. ROI assumes bill savings at your selected B2B or B2C tariff.
Will batteries power my home during a blackout?
Only with a hybrid inverter and battery storage configured for backup (EPS/backup port). On-grid inverters shut down during grid outages for safety. Select a hybrid inverter and add compatible batteries in the constructor for backup capability.
What is the minimum and maximum system size?
You set the number of modules (625 W or 435 W). Total kWp = modules × module power, capped by the selected inverter (+35% DC oversize). Very large projects may need multiple inverters after engineering review.
How do I request a quote from the constructor?
Tap Get exact quote to open WhatsApp (+995 568 999 668) with your configuration pre-filled: inverter, batteries, kWp, extras, total price, and payback. An Inversol manager will follow up with a formal proposal.
Why are some battery options unavailable?
Pick inverter type first: On-Grid hides storage; Hybrid LP shows only 51.2 V batteries; Hybrid HP shows only HV storage. Incompatible options are hidden so you cannot pick an invalid mix.
Is HECKMAN HV RHFP available in the constructor?
HECKMAN HV RHFP is price-on-request and not listed in the self-service configurator. See the product page or contact Inversol for HV commercial storage quotes.
What module options are in the constructor?
Two options: 625 W at 330 ₾/module (0.625 kWp each) or 435 W at 250 ₾/module (0.435 kWp each). Total DC power (kWp) = number of modules × module kWp.
Can I use the constructor for commercial and industrial projects?
Yes — size the array with module count, select the business (B2B) tariff for ROI, and stay within the inverter +35% DC limit. Large C&I projects often need custom engineering, multi-inverter layouts, and HV energy storage; use the constructor for budgeting then request a site audit.