PINGALAX SHELL AC EV Charger — 7 / 11 / 22 kW

Q: Which kW variant do I need?

Match to panel and utility limits—7 kW single-phase homes, 22 kW three-phase commercial.

Q: OTA requirements?

Stable Wi-Fi or Ethernet backhaul for firmware—document network ownership (client vs installer).

Q: IP65 meaning?

Dust-tight and water-jet resistant—still follow mount orientation and cable gland torque specs.

Q: PINGALAX vs Turbo H1?

Compare IP rating, OTA, cable management, and local warranty support from Inversol.

PINGALAX SHELL AC is a minimalist IP65-rated AC wallbox family spanning 7, 11, and 22 kW—designed for visible architectural installs where charger hardware must survive weather and dust.

Tech Specs

PINGALAX SHELL AC EV Charger — 7 / 11 / 22 kW — Tech Specs
Parameter	Value
Technical Data
Brand	PINGALAX
Model	PCAC-J5
Number of Connectors	1
Efficiency	≥ 99%
Cable Length	5 m (standard)
Measuring Accuracy	1%
Output Power	Up to 22 kW / 32 A (3-phase); up to 7.4 kW / 32 A (1-phase)
Nominal Voltage	400 VAC ±15% (3-phase IEC); 230 VAC ±15% (1-phase IEC); 50/60 Hz
Design Standards	IEC 61851-1
Protection Functions	Overcurrent, overvoltage, undervoltage, short circuit, overload, overtemperature, ground fault, leakage, lightning
Mounting Type	Pedestal / Wall-mounted
Connector Type	Type 2 (IEC)
Cooling	Air cooled
Dimensions (H x W x D)	310 × 224 × 128 mm
Mounting Position	Indoor and outdoor
Weight	Approx. 4 kg (with standard cable)
IP Rating	IP65
Noise Level	< 40 dB
Max. Working Altitude	≤ 2000 m
Operating Temperature	-30°C to 50°C
Operating Humidity	5% to 95% RH (non-condensing)
Certifications	CE (TUV), CB, CNAS, CMA
Authentication Methods	RFID card / PINGALAX App (Bluetooth or Wi-Fi) / Plug and charge / Scheduled charging
Internet Connection	Ethernet / 4G / Bluetooth and Wi-Fi
Communication Protocol	OCPP 1.6 / OCPP 2.0.1 / Stand-alone / Modbus RTU RS485

IP65 protection suits outdoor parking without deep canopy coverage—common for retail forecourts and boutique hotels. OTA firmware updates reduce truck rolls for protocol tweaks as EV OEMs adjust pilot signaling.

Multi-power SKU simplifies distributor inventory: one enclosure style, field-selected kW variant per circuit capacity. Load management integrates with facility CT clamps similar to Home H2 series.

Pair with commercial PV and storage from our inverter catalog for daytime charging offset; PINGALAX does not communicate on inverter CAN—coordination is at the energy management layer.