Skip to content

Partner Academy · EcoBSS / FLEX

Fault 3P HV F42

Parallel_Version_Fault

Parallel firmware mismatch or master/slave link lost

EcoBSS register: Parallel_Version_Fault. In the field this usually means the master/slave parallel link broke — one inverter went offline or lost communication (firmware versions on the cluster must also match).

Register map

Family
Three-phase HV
Register
557
Bit
9

Field checks

  1. Confirm both (all) units in the parallel pair/cluster are powered and online — master and slave.
  2. Check parallel communication cable, connectors, and addresses; a lost link looks like one unit “left” the parallel mode.
  3. Compare firmware versions on every unit in the parallel group — they must match (system name: Parallel_Version_Fault).
  4. Restart the cluster in the correct order after fixing power/comms; if F42 returns, contact Inversol with model, SN, and FW of each unit.

FAQ

What does EcoBSS F42 mean?
Parallel firmware mismatch or master/slave link lost
What should I check for EcoBSS F42?
  1. Confirm both (all) units in the parallel pair/cluster are powered and online — master and slave.
  2. Check parallel communication cable, connectors, and addresses; a lost link looks like one unit “left” the parallel mode.
  3. Compare firmware versions on every unit in the parallel group — they must match (system name: Parallel_Version_Fault).
  4. Restart the cluster in the correct order after fixing power/comms; if F42 returns, contact Inversol with model, SN, and FW of each unit.
When should I contact Inversol?
Confirm LV vs HV family on the nameplate, complete the field checks, then contact Inversol with model, SN, family, and a photo if the code returns after a clean power cycle.

Error won't clear? Send a photo of the display to WhatsApp +995 568 999 668: an Inversol engineer will tell you what to check.

Installer or service company? Deye, ECOBSS and Heckman equipment: partner prices on request via WhatsApp.

WhatsApp

Equipment for this class

This information is for reference only. Electrical work is performed by a qualified specialist in accordance with the manufacturer's instructions and local regulations. Code names are given per the ECOBSS manual for the stated series and may differ for your model.