Skip to content

Partner Academy · Deye

Fault F56

DC Bus Voltage Too Low/High

DC bus voltage out of operational range

Deye service: DC Bus Voltage Too Low/High — storage health / pulsed loads.

Field checks

  1. Check energy-storage health and magnitude of pulsed loads.
  2. Restart the device after clearing DC-bus extremes.

A BMS that still shows pack voltage while BAT is only a few volts usually means an open switch, a fuse, or a pack that has gone to sleep after a deep discharge.

For energy-storage pairing see LiFePO4 energy storage used with this inverter class.

FAQ

What does Deye F56 mean?
DC bus voltage too low: the pack is empty or the DC path is open (switch, fuse).
Where do I measure for F56?
On the inverter BAT terminals, not only on the BMS screen. Compare the two numbers.
When do I call service for F56?
When BAT stays low after the pack is on and a charge path exists, or when BMS and BAT voltages still disagree after switch and cable checks.

Error won't clear? Send a photo of the display to WhatsApp +995 568 999 668: an Inversol engineer will tell you what to check.

Installer or service company? Deye, ECOBSS and Heckman equipment: partner prices on request via WhatsApp.

WhatsApp

Equipment for this class

This information is for reference only. Electrical work is performed by a qualified specialist in accordance with the manufacturer's instructions and local regulations. Code names are given per the Deye manual for the stated series and may differ for your model.