Skip to content

Partner Academy · Deye

Fault F42

Parallel Version Fault

Parallel units firmware mismatch

Deye service: Parallel Version Fault — unify firmware across the cluster.

Field checks

  1. Update firmware on all paralleled inverters to the same version.

The nominal grid in Georgia is 220 V single-phase and 380 V three-phase, 50 Hz. A tolerance of ±10% (198–242 V per phase) is information about the grid, not a value to type into Grid Setup. Grid Setup limits follow the grid operator and the inverter profile.

For this AC-side class see Deye hybrid inverters in Georgia and size a kit in the system constructor.

FAQ

What does Deye F42 mean?
Low AC grid voltage: the voltage is outside the limit or the GRID terminals are loose.
What should I check first for F42?
The voltage on the GRID terminals against the Grid Setup limits, then the terminal tightness.
When do I write Inversol for F42?
When the terminals are tight, the voltage is normal and the code stays. Send a photo, the L1–L3 voltages and the model.

Error won't clear? Send a photo of the display to WhatsApp +995 568 999 668: an Inversol engineer will tell you what to check.

Installer or service company? Deye, ECOBSS and Heckman equipment: partner prices on request via WhatsApp.

WhatsApp

Equipment for this class

This information is for reference only. Electrical work is performed by a qualified specialist in accordance with the manufacturer's instructions and local regulations. Code names are given per the Deye manual for the stated series and may differ for your model.